|
|
|
|
|
|
HomeBaby's RoomSafety ToolsGatesKidco Y Spindle |
|
|  |
| Customer Reviews: | | Average Customer Review: ( 20 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
19 of 19 found the following review helpful:
 A great solution for a wrought iron gate problem Jan 17, 2010
By Paul K.
Others on here have discussed how well this works, so I think I will provide a little detail of our exact experience. We originally purchased a well reviewed, non-pressure mounted baby gate for our stairs. However, I realized the assembly was far too complicated, so instead we purchased an additional KidCo G15. We already had two and were extremely happy with their simplicity and quality.
One side of our staircase is a wall, so it presented no problems. The other is a wrought iron gate, so it presented plenty of problems. At first, I only ordered one Y Spindle, then realized when I received it that you actually need two, one for the top (as you see in the picture of the Y Spindle) and the other for the bottom (not pictured). We got our second one and installed it and couldn't be happier. It is SO easy and SO simple compared to the other remedies I found that I highly recommend it to anyone dealing with a similar problem.
9 of 9 found the following review helpful:
Works like a dream Jan 24, 2008
By Gloria Dempsey
"GDemp616"
This spindle attachment is exactly what we needed. Our stair well banister and the wall do not match up at all - the gate would have to be slated and we did not want to drill into the banister. The spindle attachment allows us to use the tension option on the gate without having to damage the walls or banister. We love it!!! If you have a wide staircase, I would recommend getting the gate extender to use with the Y spindle option - our son is starting to figure out that he may be able to get up the space in between where the gate ends and the stair rail begins since it is about a 5" gap. Y spindle works great!!!
7 of 7 found the following review helpful:
Perfect solution Jan 16, 2007
By D. Thompson
We looked for a way to install a gate on our steps that have only a railing on one side. We really didn't want to drill holes into the banister, and this was the perfect solution. It works perfectly on both the top and bottom of our stairs with the pressure-mounted gate.
5 of 5 found the following review helpful:
Perfect attachment for the G15 gate Jan 07, 2008
By Jason, Kellie, & Jade
"Jayman"
Due to the design of our stairs we had a very hard time finding a gate that would work at the bottom / top of our stairs. This banister spindle attachment works perfectly with the G15 gate. It is super easy to use / install (as well as the gate). I would recommend putting some foam tape or masking tape on the inside part of the "Y" on the spindle. That way it won't mark up the banister when installed.
3 of 3 found the following review helpful:
Fits several kinds of gates! Amazing!!! Jul 23, 2011
By medicalparents
This product is amazing. I had purchased the Dreambaby version of this first but had to return it bc they weren't long enough once installed in the gate to be tight enough since our wrought iron spindle is several inches over from the edge of the stairs, if that makes sense. This fits on the dreambaby gates (though they would never tell you that), plus is several inches longer, making it much more sturdy, plus you can order it in a pack of 1 instead of 2 which is less expensive and always good! I also have a munchkin gate that it fits on just fyi. Also, the "grip" on this is much better than the dreambaby version. It is overall a much more substantial version of the dreambaby one.
See all 20 customer reviews on Amazon.com
|
| | |
|
|
|
|
|
